Radiator

[Cobra fan]

Hi. Has anyone tryed using one of these?

https://www.ebay.co.uk/itm/3-ROW-ALU...75.c100623.m-1

It's a bit norrower that the SD1 3 core rad but the inlet and outlet still look to be in the same area. I think some of the pipework will need changing due to the width being smaller.
Your thought would be very much appriciated.

Thanks
Anthony

[jon1d]

Hi Anthony,

The one that you show is very narrow compared to what you can fit so you will be loosing out on core size by some 30% .
Core Size: 408x416x56mm = 1697 cm2 . Compared to a Nissan s14 200sx core size 635 mm×360 mm×52 mm 3 rows =2286 cm2 which you should be able to fit.

You could also look at NISSAN-SILVIA-240SX the height including the filler cap is a bit larger 485mm but you might be able to fit it in . The outlets are correct and the core volume area is 2304cm2 and 52mm core.

Core Size: 360x642x52 [mm]
Overall Size: 485x670x98 [mm]

https://www.ebay.co.uk/itm/3-ROW-ALU...MAAOSwV45bsHHM