Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2009
    Location
    wiltshire
    Posts
    242

    setting up end float on 1984 xj6

    Hi,
    Brought 2nd hand hubs,
    Put new bearings and seals in, no end float what so ever,
    Any ideas where I can get the end float set up on rear hubs ?
    Thanks,
    Cobraalan.

  2. #2
    Join Date
    Jan 2006
    Location
    Chelmsford Essex
    Posts
    867
    Hi Ian,

    Do you not have a dial gauge and having a go yourself? You have done the hard part.

    The video quality is not great but the guy explains it well.
    https://www.youtube.com/watch?v=qdNyUeFyh4E
    Last edited by jon1d; 09-08-19 at 01:34 PM.

  3. #3
    Join Date
    Jun 2009
    Location
    wiltshire
    Posts
    242

    Red face End Float

    Quote Originally Posted by jon1d View Post
    Hi Ian,

    Do you not have a dial gauge and having a go yourself? You have done the hard part.

    The video quality is not great but the guy explains it well.
    https://www.youtube.com/watch?v=qdNyUeFyh4E
    Hi jon1d,
    Thank you for your reply, I have looked at the video and "borrowed" a dial gauge, end float all done with some shims from SNG Barratt,
    Shropshire, I brought some on sale or return!!!!
    Thanks again,
    Cobraalan.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •