Page 3 of 3 FirstFirst 123
Results 21 to 21 of 21
  1. #21
    Join Date
    Nov 2004
    Lurgan, Co Armagh, Northern Ireland
    Driver side pics as promised. I had a quick check and the bottom of the plate is about 10mm from the inside of the body but the top is almost touching. I can't get at it but I think the pivot side where the bolt is touches.

    The video looks good. You can see the weld on this side between the bolt heads. I had to angle to whole plate the same as you.

    I put up a picture here to show the gap between the front edge of the door and the body. it was 3mm originally but you could bend the hinge to make contact so I modified the doors/body. The paint also adds millimetres to both surfaces. i never really worked out how much though? i sanded most of the primers back off!

    Good luck and keep up the good work!
    Attached Images Attached Images

    RV8, Sierra based Viper.
    I'm sure if I give it enough love it will, someday, love me back!?

Page 3 of 3 FirstFirst 123

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts