Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2019
    Location
    amersham
    Posts
    82

    Momo steering boss attachment

    Just recently bought a Momo steering boss to fit my donor Bmw column and noticed that on the column splined shaft there is what appears to be a round spacer approx 10 mm long, the question is does anyone know whether this is discarded or retained. A trial fit without the spacer does make the momo boss scrape slightly on the column plastic trim which would indicate that it is required, i just need to make sure that if it is retained then i have sufficient spline engagement. Presumably the lug that projects from the boss acts as the indicator cancel, does it matter on the orientation of the lug when the boss is installed.
    Any suggestions appreciated.

  2. #2
    Join Date
    Apr 2012
    Location
    Wrexham
    Age
    48
    Posts
    559
    My bmw column never came with one so i had to make a washer or it caught as you said.
    Others will chime in and confirm
    Regards
    Gav
    AK Ls1/t56
    Body on April 2014
    Passed IVA March 2017
    Registered April 2017.

  3. #3
    Join Date
    Dec 2019
    Location
    amersham
    Posts
    82
    Thanks Gav
    I am sure its needed for that reason.
    Regards
    Martin

  4. #4
    Join Date
    Jan 2004
    Location
    Southwest, Somerset, U.K.
    Age
    35
    Posts
    3,249
    100% needed

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •