Rear hub nut

[alunwill]

Anyone replaced the castellated nut on the rear hub with a nylock type. If so what's the thread size.

Also, I've got 2 torque settings written down, 95 ftlb and 140 ftlb. Which one is spec

Regards

[AKCharlie]

Is it Jag rear end? If so, ensure you use the correct castellated nut. These have an insert inside which locks the thread. If I remember correctly you need about 270Nm torque when tightening. The nuts are about £20 each and you should only use them once!
Charlie

[JamesB]

I would NOT use a nylock all of that lot gets quite hot..... Why would you not use a castellated nut?

[alunwill]

Yep, thought about the heat andstayed with castellated nut.