Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2012
    Location
    Malvern, Worcestershire
    Age
    75
    Posts
    381

    Recommendations for Tonneau cover

    Hi Chaps,

    Any recommendations for someone to make and fit a tonneau cover, including the body studs, within sensible distance of Worcester. There used to be one near Redditch but I've been told they've closed ?

    Thanks,

    Brian.

  2. #2
    Join Date
    Oct 2018
    Location
    Shipston-On-Stour
    Posts
    77
    Many years ago I used Aldridge Trimming to do all my interior including a hood and a tonneau. I am still using it today! They may not be the cheapest but they certainly did turn out to be good value for money for me. https://www.aldridge.co.uk/index.cfm?id=1
    Dax with 1964 Dual Quad 427 and Toploader box

  3. #3
    Join Date
    Sep 2012
    Location
    Malvern, Worcestershire
    Age
    75
    Posts
    381
    Thanks, Chris.

  4. #4
    Join Date
    May 2005
    Location
    Sheffield
    Posts
    1,025
    Don’t have studs on the top of the doors - your elbows will thank you. Also it prevents you reaching in to open a door and forgetting the tonneau fixings and ripping something.
    Nuf Said

  5. #5
    Join Date
    Oct 2018
    Location
    Shipston-On-Stour
    Posts
    77
    That's good advice! I forgot to say that on the doors I have the flat press studs (two each door I think), not the same 'upright' ones as around the back of the hood/tonneau. Whichever trimmer you choose will probably know this. Certainly I found the guys at Aldridge very knowlegeable. Good luck
    Dax with 1964 Dual Quad 427 and Toploader box

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •