Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2004
    Location
    Portsmouth, Hampshire
    Posts
    352

    SRV8 Front shock bushes

    Hoping there is someone out there with a good memory. Im looking to replace my front shock bushes on my SRV8 but cannot remember where they came from when I first built the car.
    The rears are standard jag sized but the front is a smaller inner diameter where the bolt goes through and I cant find any reference in my old build manual.
    I seem to remember the standard Jag damper was very different mounting so dont think it is standard front.
    Paul

    SRV8 - 429 Ford Big Block, 4 speed toploader

  2. #2
    Join Date
    May 2016
    Location
    Hockley ,Essex
    Age
    57
    Posts
    247
    My memory isn't much cop going back to when I build my SRv8.
    The info from my build log is that you require the two reducing
    sleeves from the tops of the old rear shox (series 2 jag xj) for the new front
    shox.
    If that's any help .
    Chris.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •