SRV8 Front shock bushes

[pevans]

Hoping there is someone out there with a good memory. Im looking to replace my front shock bushes on my SRV8 but cannot remember where they came from when I first built the car.
The rears are standard jag sized but the front is a smaller inner diameter where the bolt goes through and I cant find any reference in my old build manual.
I seem to remember the standard Jag damper was very different mounting so dont think it is standard front.

[Chris1]

My memory isn't much cop going back to when I build my SRv8.
The info from my build log is that you require the two reducing
sleeves from the tops of the old rear shox (series 2 jag xj) for the new front
shox.
If that's any help .
Chris.