Reply With QuoteAnd the cost of these are......
Not listed on their site
Paul
Results 1 to 10 of 41
Thread: Noisy drive shafts
-
21-11-20, 09:24 AM #1
Head Mechanic
- Join Date
- Apr 2010
- Location
- Bishops stortford Herts
- Posts
- 893
Noisy drive shafts
XCS Designs have just done a new kit to replace the Dax modified XJ40 drive shafts with a new drive shaft and Lobro joints inside and out,
this stops that annoying clicking and knocking you get with the Dax drive shaftsLast edited by garyjettrike; 21-11-20 at 09:27 AM.
camber compensation and anti roll. http://xcsdesigns.co.uk/
-
21-11-20, 10:35 AM #2
Technical Director
- Join Date
- Mar 2008
- Location
- Coventry
- Posts
- 2,356
AK, on the road Oct 2012
-
21-11-20, 07:39 PM #3
Driving God
- Join Date
- Feb 2007
- Location
- West Sussex
- Posts
- 9,210
I'll make a guess: £1400 inc VAT.
Crendon Chassis No.49
Huddart FE428 + toploader
Not listed in the Shelby Register.
-
21-11-20, 08:37 PM #4
Technical Director
- Join Date
- Feb 2011
- Location
- Northampton
- Age
- 42
- Posts
- 4,451
Shiny! They look very nice Gary, very nice.
My DeDion build diary..
Hon Sec of the Digidash branch of the Unpopular Kit Car Design club
-
22-11-20, 02:19 PM #5
Driving God
- Join Date
- Nov 2006
- Location
- Shropshire/Wales Border
- Age
- 50
- Posts
- 6,057
Prices next week apparently
https://www.facebook.com/xcsdesigns/
They look nice but I suspect they won't be cheap!Lloyd B
Current: Crendon #54 in build - 427 Side Oiler/Cobrajet Heads/Dual 600cfm Holleys/4 speed toploader/Vintage cast knock on wheels
Dedion Dax/Clarkson 383 Chevy with roller 4/7 swap cam, AFR195 heads - SOLD
-
26-11-20, 09:16 PM #6
Technical Director
- Join Date
- Sep 2007
- Location
- Hilperton,Wiltshire
- Posts
- 2,621
Look great. £1587 + vat = £1904.40.
Andy
-
26-11-20, 09:41 PM #7
Technical Director
- Join Date
- Mar 2008
- Location
- Coventry
- Posts
- 2,356
Holy wowzers batman!!!!!
Originally Posted by corn plaster
PaulAK, on the road Oct 2012
-
26-11-20, 09:46 PM #8
Driving God
- Join Date
- Feb 2007
- Location
- West Sussex
- Posts
- 9,210
I underestimated slightly.... Originally Posted by corn plaster
Crendon Chassis No.49
Huddart FE428 + toploader
Not listed in the Shelby Register.
-
26-11-20, 11:50 PM #9
Head Mechanic
- Join Date
- Apr 2010
- Location
- Bishops stortford Herts
- Posts
- 893
That price also includes 4 cv joints and rubber boots as well as the 2 drive shafts 2 stub axles and the 2 adaptor flanges ,
it doesn’t cost much more than if you buy the Dax modified drive shafts and adaptors and 2 jag UJs and2 CV joints ,
and you haven’t got to put up with all that knocking and clunkingcamber compensation and anti roll. http://xcsdesigns.co.uk/
-
27-11-20, 12:21 AM #10
Head Mechanic
- Join Date
- Apr 2010
- Location
- Bishops stortford Herts
- Posts
- 893
The Dax web site does the drive shafts CVs and UJs for £1207 but it doesn’t give a price for the adapter flanges ,and the drive shafts are on exchange https://www.jksportscars.co.uk/cart/
camber compensation and anti roll. http://xcsdesigns.co.uk/
Bookmarks