Front number plates

[Chris1]

Full size legal plate tie-wrapped onto the bottom of the front hoop.
Attachment 39455

That's where my black & silver plate sits but I have gone to the expense
of using the "P" clips with rubber inserts .
The number plate is normal size along with the letters/numbers.
Chris.

[Chris1]

I did have tie wraps for about twenty years with no problems.

[zac]

I did have tie wraps for about twenty years with no problems.

I use duck tape to get through my MOT, but think I’m going to go down the p clip route with a 6 digit plate and use ties over the top once a year or as required!

[RogerKnill]

I used the same type of mounting block as I did for the front anti roll bar

1A9EA253-5D49-4438-B266-2DDB4897C7EB.jpeg

picture is from merlin motorsport, but RS do them as well, plus others I’m sure.

mounted to the bottom bar of the front hoop

I also used countersunk bolts with number plate fixing cover.

[bigkev38]

Bonnet sticker (normal size)
20190622_193212.jpg