Results 1 to 9 of 9
  1. #1
    Join Date
    Jan 2015
    Location
    Paignton Devon
    Posts
    500

    Lucas L542 light rubber seals

    As per the title, I can't find anywhere which will supply just the rubber gasket /seals, I already have the lenses so if you have some old ones knocking around or know of someone who will supply just the seals give me a PM
    Cheers
    Roger

  2. #2
    Join Date
    Feb 2007
    Location
    West Sussex
    Posts
    9,628
    Pretty sure these aren't sold separately.
    Did you buy the lenses from an ad on here?
    Crendon Chassis No.49
    Huddart FE428 + toploader

    Not listed in the Shelby Register.

  3. #3
    Join Date
    Jan 2015
    Location
    Paignton Devon
    Posts
    500
    Yes I got them from here, I perhaps foolishly assumed the seals were available easily

  4. #4
    Join Date
    May 2004
    Location
    Perth
    Posts
    4,678
    Try S-V-C. https://www.s-v-c.co.uk/product/l542-stop---tail-/ I have always found them very helpful. Give them a ring and ask if they can supply the seals on their own, if not they might tell you where you can get them.
    Cheers, Clive

    (If I'm not here, I'm either in my new workshop or on the golf course!)

  5. #5
    Join Date
    Feb 2007
    Location
    Billericay, Essex, England.
    Posts
    917
    Looks like Cobra Restorers have them so they must be available as a seperate item:

    https://www.parts123.com/parts123/yb...Z5Z5Z50000027b

    Expensive with shipping and etc, I'm sure. But others must have them??

    Sean
    Too many idiots, not enough villages!

  6. #6
    Join Date
    Feb 2007
    Location
    West Sussex
    Posts
    9,628
    Do you have the mounting plate already, or are you using these?
    https://spiyda.com/l542-12-volt-nega...amber-red.html
    Crendon Chassis No.49
    Huddart FE428 + toploader

    Not listed in the Shelby Register.

  7. #7
    Join Date
    Jan 2015
    Location
    Paignton Devon
    Posts
    500
    Quote Originally Posted by KevinW View Post
    Do you have the mounting plate already, or are you using these?
    https://spiyda.com/l542-12-volt-nega...amber-red.html
    Thanks for the suggestions, I had already tried Svc and the usual suspects, I'd not heard of the cobra restorers, as it goes I've now ordered some from Finishline, hopefully they'll be ok,
    Kevin, I've made my own back plates in which i will be able to use the led bulbs

  8. #8
    Join Date
    Jan 2015
    Location
    Paignton Devon
    Posts
    500
    Hopefully a few photos of what I’ve done, all to be tidied up and finished off properly https://photos.app.goo.gl/PusqeoLKwfaTFX6k6

  9. #9
    Join Date
    Feb 2007
    Location
    West Sussex
    Posts
    9,628
    Good effort - nice to see them blended in, makes back of the car look propa!
    Crendon Chassis No.49
    Huddart FE428 + toploader

    Not listed in the Shelby Register.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •