Wheels and tyres

[Deck]

[quote]"You're just a big softie"[/quote:06d4068cd8]

I think the term is "too kind" Howard...

Its a very generous offer Iain and if I have a specific difficulty I'll be sure to ask.
I was more thinking about using a manual for the overall order of the build and which bit to do next. I've been kind of just doing the bits I like, when they appeal to me, until I come across a bit I need, which then goes on the list and I do something else...
I'm just waiting for the BIG mistake to present itself! (taking on this project?)
Cheers
Declan

[hfbradley01]

Originally Posted by Deck

I think the term is "too kind" Howard...

Its a very generous offer Iain and if I have a specific difficulty I'll be sure to ask.
I was more thinking about using a manual for the overall order of the build and which bit to do next. I've been kind of just doing the bits I like, when they appeal to me, until I come across a bit I need, which then goes on the list and I do something else...
I'm just waiting for the BIG mistake to present itself! (taking on this project?)
Cheers
Declan

Declan

Do you have a manual ?

Cheers

[Deck]

I'm sure I saw it on a shelf somewhere recently, underneath a load of Ford parts I didn't like the look of! BMW is such better quality gear you know. I do remember the phrase "make a bracket" cropping up a lot. Seeing as there were no dimensions...:angry:

[hfbradley01]

Originally Posted by Deck

I'm sure I saw it on a shelf somewhere recently, underneath a load of Ford parts I didn't like the look of! BMW is such better quality gear you know. I do remember the phrase "make a bracket" cropping up a lot. Seeing as there were no dimensions...:angry:

Declan

Unfortunately the manual is at best a poor guide, but fortunately there are quite a lot of people on here who have experienced the problems you are having and will have in the future.

I'm at a similar stage in my build to Iain but I bought mine as a rolling chassis so I don't have experience of some of the build.

Perhaps if we new exactly what you have done up to now, someone could offer advice on the next appropriate steps.

Cheers

[Deck]

[quote]Perhaps if we new exactly what you have done up to now, someone could offer advice on the next appropriate steps.[/quote:17ef7ec266]
This is such a great place! You are all beautiful!

Thanks for the offers but I don't actually have any big issues at the moment. I'm currently checking wiring in the loom, switches and devices. I've used a BMW steering column and universals (which fit perfectly onto the Sierra rack!) and as all the switches are bmw I used their loom including fusebox and relays. This seems to be working out so far. I also used bmw pedals including clutch and brake masters.

I bought someone's fairly well put together part built and un built a lot of it. The only thing I haven't done is take the body off. It measures up quite well. Having seen some recent pictures I might have to take it off when I get some wheels... the current big decision.

I have to say its very encouraging to know that you's are here if (when) I really get stuck, and/or want a distraction from the real work!
Best of luck and further thanks.
Declan

[steamyrotter]

Of all the "Manuals" i have read the most important and useful bit was right near the start....


"Put Kettle on and retreat"....

modelled my whole life round that one


:thumb:




.