Lasted build pics

[osgood]

Well done Iain, light at the end of the tunnel at last matey even though it may only be some pra-- with a big torch

As a matter of interest I have removed the Jaguar trailing arms as well and replaced them with tie bars going to the centre of the chassis as per Cheng Lim, Super-flex bushes with greasers both ends and I must say the rear ends sits and handles a lot better.

Keep up the good work chap regards Eric.

[legend]

I'm not sure what the state of play is with regards to the P700 replica lights. Is there anyone out there able to shed more information on whether they pass the SVA. If they don't..... can anyone lend me their lights?

Cheers...[/quote]
Hi Ian, Steve at Staffords told me Jerry Hawkridge gets the P700's through SVA ! who knows, all the best Tony.

[steamyrotter]

I like under the bonnet. Nice touch.
May pinch that idea if i may?

As you have done a pukka job ob the ride height could you possibly furnish me with some sizes please??
Wheel & Tyre dia.
Height to highest point of the wings (ie inside lip to ground.
And finally the gap you have above your wheels to the wheel arches?

Thanks mate.

[Iain]

Originally Posted by steamyrotter

I like under the bonnet. Nice touch.
May pinch that idea if i may?

As you have done a pukka job ob the ride height could you possibly furnish me with some sizes please??
Wheel & Tyre dia.
Height to highest point of the wings (ie inside lip to ground.
And finally the gap you have above your wheels to the wheel arches?

Thanks mate.

Help yourself at nicking any ideas I've had. Anything that helps us Viper owners I say!

Wheel Diameter is 17 inch
Tyre Size Front - 225/45 ZR17
Tyre Size Rear - 255/45 ZR17

I've got approximately 20mm to 30mm between wheel and wheel arch though I think it may actually need upping a little.

I forgot to take the measurement from wheel arch lip to ground, I'll try and do that tomorrow.


Cheers...

[steamyrotter]

Thanks Iain

Much appreciated