Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Join Date
    Sep 2009
    Location
    Leeds
    Posts
    3,012
    I agree with Grahams statement about the cobra should emerge from the Lexus L rather than overlay/overlap - as the merge shows an evolution of form rather than chucked together - lol

    This was/is the one i made up based on Grahams(?) first sketch - made from 5mm ally plate



    in theory, you could scan this with an app on your phone to create a 3d image that you could then print on your 3D printer - image could also be amended using a 3D cad like app on PC

    rgds
    Gary
    Last edited by nealgs; 28-01-20 at 12:47 PM.
    Conny - A Carnival Red Metallic (paint code Ref: Jag CGG/1811) Southern Roadcraft V8 ( SRV8 ) with 383ci stroker chevy.

  2. #12
    Join Date
    Feb 2011
    Location
    Northampton
    Age
    42
    Posts
    4,837
    Spoiler alert: I am not an artist



    But yes, properly done so that the snake emerges from the L would look better
    My DeDion build diary..
    Hon Sec of the Digidash branch of the Unpopular Kit Car Design club

  3. #13
    Join Date
    Jan 2014
    Location
    High Wycombe
    Age
    57
    Posts
    793
    So, I've been looking at this 3d printing lark and the more I look the less I seem to understand it. I've seen prices from £30.00 to £300.00 (and I'm sure there are plenty a lot more than that) I've read articles that say they are everywhere from schools to the Space Station and they can print almost anything made from almost anything (plastic to Titanium)!

    Where to start? I'm not sure I actually "need" one but I have an idea it will get used if I have one. I would like something that can do rigid plastic or metal (still want to try and do "the Lexus badge") and is not going to kill the credit card with up front costs or stuff that runs out every 5 minutes as the ink does on a normal printer.

    What do others have and are they any good at what the hype says they can do? As I've said before my art skills are one above non existent so will be relying on the computer to do the fancy stuff if that's even possible.

    Graham.
    AK gen 1 delivered 05/05/17, on the road shortly!

  4. #14
    Join Date
    May 2016
    Location
    Cheshire
    Age
    52
    Posts
    421
    I got the Ender 3 Pro for £180 and I'm happy with it, though results (probably on most printers) depend on some trial and error and a learning curve as you start to understand how they work and that changing one setting can affect others. Fortunately, I like that kind of thing.

    If you want to print metal, though, I think you're talking a price that's on a whole different level.

    I use blender and cura to design my own items, though, and prefer functional items, from bathroom shower door hinge replacements to fake pusher fans for the Sumo (if you can call those functional).

  5. #15
    Join Date
    Feb 2011
    Location
    Northampton
    Age
    42
    Posts
    4,837
    Well first you have to decide whether you want to print via FDM or SLA, and from there what kind of materials you'll want to print and from there .. or, buy yourself a cheap FDM printer and start playing

    I have an Anycubic Chiron, one of the bigger build volume printers (400x400x450mm) rather than the usual 220x220x250 (Ender 3 Pro, Prusa i3 etc) but that does make the machine huge and slower (it's harder to accelerate and stop the massive print bed without introducing wobble into the prints).

    Prusa i3 Mk3 is probably known as the 'best' hobby printer - but expensive.
    Ender 3, CR10s etc are Prusa clones IIRC, and are excellent value for money with minimal 'tweaking' needed
    Chinese crap is generally, er, crap. You can make it good but you'll spend all your time printing upgrades
    Anycubic are the best of the Chinese clones and actually generally quite good with a few small tweaks.

    As skinnymathew says, there's a huge learning curve to all the settings and things you need to tweak and understand to get good prints! But there are a lot of good online resources to help you.

    That's all FDM printing or, basically, squirting molten plastic down in layers. The prints have an obvious 'look' as you can see the layers (which can be smaller or larger depending on your printer and needs - larger is faster, smaller is a better finish). Mostly you can print in PLA (good, robust, slightly brittle, easy to print), PETG (good, robust, less brittle, harder to print), ABS (hard to print, extremely strong but requires a heated enclosure for best results), ASA (in between PETG and ABS), TPU (flexible thermoplastic - kinda rubbery - and meant to be a sod to print, I haven't tried).

    If you go for SLA then the print emerges from the toxic goo - I'm not kidding, literally that's how they work. Rather than squiring down molten plastic they use light to solidify goo into a solid polymer. Very cool, a little more work involved in post processing, the fumes aren't good for you (needs a well ventilated workshop really) and neither is the goo! But the results are smoother, need less post-processing (filing, etc) and usually stronger. Elgoo Mars is a good choice here. It's basically like printing with epoxy resin.. I kinda want one.

    Confused yet, Graham?

    Oh yes, forget powdered sintered metal printing or any of those things - the printers will run into many thousands!
    My DeDion build diary..
    Hon Sec of the Digidash branch of the Unpopular Kit Car Design club

  6. #16
    Join Date
    Jan 2014
    Location
    High Wycombe
    Age
    57
    Posts
    793
    Skinny, you got your end with a pro for how much? I'm sure Kings Cross is cheaper.

    Aaron, thanks for the reply, I have absolutely no idea what any of it meant!

    I love the forum, simple questions waiting for simple answers and I don't have a clue by the time someone has explained it. Kind of reminds me of school.

    Thanks both of you, I think Father Christmas might want to deliver that package to someone else, beyond my understanding but I'm glad there are those out there that do.

    So.

    How do we get this damn badge to a point where;

    1. we all like it.
    2. someone can make it.
    3. it looks sh*t hot on a cobra?

    Graham.
    AK gen 1 delivered 05/05/17, on the road shortly!

  7. #17
    Join Date
    Dec 2008
    Location
    Newcastle upon Tyne
    Posts
    1,934
    Hi,

    During many weeks of enforced idleness when I could not venture into the garage for medical reasons (- a bad episode of eczema which wiser councils had determined to be caused by exposure to toxic chemicals - mainly petrol & oil!!) I spent some time finishing my hybrid gear knob (see below).

    The knob is from the BMW donor vehicle, for the GS6-53DZ gearbox that now sits behind the 1UZ-FE, and the gearshift pattern was replaced with the Lexus / Cobra logo discussed previously on this thread.

    It served to keep me occupied for a time but I now feel the need to return to the real challenge of tuning the 1UZ and getting the car back on the road.

    Take care,
    Ian







    Pilgrim Sumo Mk3; IVA Apr. 2014; RV8 3.9 EFi ; Cosworth T5; Granada Donor
    Phase Two underway - Conversion to Japanese

  8. #18
    Join Date
    May 2004
    Location
    Cowbridge, United Kingdom
    Age
    63
    Posts
    10,347
    Nice Job Ian.
    Carrol will be rolling in his grave LOL!
    Kev Davies
    South Wales Area Rep. UKCC Membership Secretary
    DAX Mk4, 383 Chevy Stroker, Tremec. SOLD
    Contemporary CCX 3-4028, 445ci Big Block FORD FE,TKO 600, Old School IVA'd and SOLD
    Dax De Dion LS2 and T56 IVA'd June '17 SOLD
    1965 Ford Mustang 289 Convertible SOLD
    In build- Hawk 289 Sebring Awaiting IVA

  9. #19
    Join Date
    Jan 2014
    Location
    High Wycombe
    Age
    57
    Posts
    793
    Like, like, like. (Sorry for the late reply).

    My artistic skills or lack there of have got this far;

    IMG_20210519_125708834_BURST000_COVER_TOP (1024x768).jpg

    So a "slight" cop out on what I wanted to do but couldn't find a plastic snake the correct size to wrap around.

    Graham.
    AK gen 1 delivered 05/05/17, on the road shortly!

  10. #20
    Join Date
    Jan 2014
    Location
    High Wycombe
    Age
    57
    Posts
    793
    Also finished the window in the garage (a while ago now). I think it looks OK.

    IMG_20200504_163220873 (1024x768).jpg
    AK gen 1 delivered 05/05/17, on the road shortly!

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •